804050UK G4 Commercial chilled and sparkling installation instructions - Sept. 2016 - v3.02 Page 15 of 20
Installation instructions
Note Neither the braided hoses or the tubes supplied can be lengthened.
Note Chilled and sparkling outlet tubes must be insulated with the foam insulation provided.
Cold isolation valve
(not supplied)
Clearance
Envelope
535mm
Note All plastic / silicon tubes must be
trimmed to size. They must have a constant
fall to the Command-Centre
TM
.
Note Mains hose length is
750mm. Electrical power cable
length is 3.0m nom.
Position the Command-Centre
TM
according to the hose and cable
lengths supplied.
GAS IN
WHITE
POWER
CABLE
USB
MAINS
IN
SPARKLING
OUTLET
CO2
IN
BLUE
STILL
OUTLET
BRAIDED
336mm
3.2 Chilled and sparkling HydroTap
®
G4 models
Refer to 803341UK Tap installation
instructions (for Arc / Cube also refer to the tube kit assembly instructions) supplied with the tap.
Arc / Cube
Elite
Classic
50mm
50mm
To Next Page
Loading...
