Quick Start Installation Guide
807118UK v1.12 12.23 G5 BC Quick Start Guide
29
12.6 System priming
SECTION 12: Commissioning
• Read the on screen information.
• Touch the run arrow to go to the next
screen.
SYSTEM PRIMING 12:12 PM
The system reticulation will be primed
with mains water.
Ambient water will automatically be
dispensed from the tap.
SYSTEM PRIMING 12:12 PM
Hot Tank
Pause:
Cold Tank
Completed Cold tank
emptying.
[Normal operation]
Auto
Dispense
• Monitor the on screen information.
• Note if ‘Font’ has been selected on the drain away option (see section
12.4) and auto dispense is disabled on entry into this screen; the screen
prompts the user to dispense using the tap during the process.
12.7 Cleaning preparation
HYDROTAP CLEAN PREPARATION 12:12 PM
Step 1.
Insert cloth below filter.
Step 2.
Remove filter and refit dust cap.
• Read the on screen information.
• Place a cloth under the filter.
• Remove the filter, refit the dust cap,
and set aside in a clean environment.
To Next Page
Loading...