Quick Start Installation Guide
807118UK v1.12 12.23 G5 BC Quick Start Guide
35
SECTION 12: Commissioning
• Empty the hot tank first (boiling models).
• Select NO if it is not safe to continue.
• Select YES to continue safely.
12.9 Tank flush
TANK FLUSH 12:12 PM
Fresh water will be flushed through the
tank/s multipe times as shown by the cycle counter/s.
If prompted dispense water from the hot tank
using the tap safety feature.
Enabling ‘Auto Dispense’ will fill/empty
the tank/s automatically.
Toggle to manually dispense from the tap.
• Read the on screen information and
instructions.
• Touch the green arrow to run.
EMPTY HOT TANK 12:12 PM
Boiling water will be dispensed
into your sink.
Is it safe to continue ?
NO YES
EMPTY HOT TANK 12:12 PM
Boiling water will be dispensed
into your sink.
Is it safe to continue ?
Clear sink area.
NO YES
EMPTY HOT TANK 12:12 PM
Press and hold to
empty tank
100.0
O
C
Dispense boiling
water using the
tap safety
feature
WARNING ! Boiling water
will be dispensed ! Check
sink area remains safe
OR
• There are two ways to empty the hot tank:
• Dispense boiling water from the tap using
the tap safety feature.
• OR
• Touch and HOLD the green run arrow
icon to dispense directly from the
touch screen display.
• If choosing to dispense directly from the
touch screen display, ‘dispensing boiling
water’ text flashes on the screen while
holding the button.
• After the boiling tank is emptied the
system progresses to the tank flush screen.
• If NO is selected (indicating that it is not
safe to continue) the screen will prompt
the user to clear the sink area.
• Once it is safe to continue select YES to
empty the hot tank.
• Note For all models, the on screen cycle counter displays the number of
remaining cycles in the tank flush process.
• Monitor the on screen information.
EMPTY HOT TANK 12:12 PM
Press and hold to
empty tank
100.0
O
C
Dispensing boiling
water !
To Next Page
Loading...