Zip HydroTap G5 BC100 - Page 36

36
Quick Start Installation Guide
807118UK v1.12 12.23 G5 BC Quick Start Guide
TANK FLUSH 12:12 PM
Pause:
Cold Tank
Cycle 0/3
Hot Tank
Cycle 0/2
100.0
O
C
Dispense hot
water to empty
tank.
SAFETY ON
Cold tank
emptying
Auto
Dispense
• Monitor the on screen information.
• The hot tank will cycle twice.
• The cold tank will cycle three times.
SECTION 12: Commissioning
EMPTY HOT TANK 12:12 PM
Press and hold to
empty tank
100.0
O
C
Dispense boiling
water using the
tap safety
feature
WARNING ! Boiling water
will be dispensed ! Check
sink area remains safe
OR
• Note For all boiling models, if after
filling the hot tank during the tank flush
process, the hot water temperature is
still above 50
0
C the tank will need to be
emptied again.
12.10 Select the booster
• Read the on screen instructions.
• Select the appropriate option.
• BC100 & 30 models select Booster
installed.
• All other models, Booster not installed.
EXTERNAL BOOSTER 12:12 PM
Has an external booster been installed ?
Yes
installed
No
Not installed