8. Service and Maintenance
The device contains no user-serviceable parts inside. The product warranty will be
void if opened.
Follow the below instructions to ensure that your Zivid camera is well maintained:
• Check screw connections and connectors at regular intervals.
• Do not block the air opening on the front and rear sides of the product.
• The unit uses active and passive cooling, allow some space around the device
for airow.
• Use a small vacuum cleaner or a small canister of compressed air to remove
dust or other accumulated particles from the glasses or in between the ribs of
the heat sink.
• Regularly clean optical glass parts of the device.
• Check and update the calibration on a yearly basis by performing Ineld Cor-
rection (and Hand-Eye Calibration) when necessary.
Rev 1.0 - 9/2021 19 Zivid.com
To Next Page
Loading...