15
Ethernet Connection
Direct connection
Important Notes:
1. Both 10Base-T and 100Base-T
are supported
2. This cable distance must be less
than 100 meters or 330 ft.
3. For cables length of more than
100m. use HUB to amplify the
signal
TCP/IP
CR10 Card Issuer
The CR10 is connected to the server using USB
connection.
To connect C3-200 with a PC directly, connect both devices with a straight network cable. As the C3-200 supports auto MDI/MDIX , it
is not necessary to use a crossover type cable.
CR10 Card Issuer
C3-200
C3-200
To Next Page
Loading...
Need help?
General
