ZKaccess TF1700 Installation Guide

26
TF1700 & ZKAccess CLASSIC 3.5 software INSTALLATION GUIDE
How to Place a Finger on Scanner
ZKTeco’s ngerprint readers will give optimal results for ngerprint matching
if the following recommendations and suggestions are followed.
Select a nger to enroll
• It is recommended to use an index nger or
a middle nger.
• Thumb, ring or little nger are relatively
dicult to place in the correct position
How to place a nger on a sensor
• Place a nger such that it completely covers
the sensor area with maximum contact.
• Place core of the ngerprint at the center of
the sensor. The core of a ngerprint is a center
where the spiral of ridges is dense. (Usually core
of ngerprint is the opposite side of the lower part
of a nail.)
• Place a nger such that the bottom end of a
nail is located at the center of a sensor.

ZKaccess TF1700 Specifications

General

Brand	ZKaccess
Model	TF1700
Category	Controller
Language	English