EasyManuals Logo

ZKTeco AL10B Installation Instruction

ZKTeco AL10B
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Remarks
1. The default setting of the device allows ANY fingerprint to unlock.
2. Please register at least one administrator for the newly installed lock. Without administrator, no
registration for any normal user is allowed.
3. The lock is equipped with mechanical keys for manually unlocking. Please keep the mechanical keys in a
safe place.
4. To power on the lock, four alkaline AA batteries (not included) are required. Non-alkaline and
rechargeable batteries ARE NOT RECOMMENDED.
5. Do not remove batteries when the lock is in working state.
6. Please replace the battery soon when the lock prompts the voice of low battery.
7. If there is no activity performed on the lock for 10 seconds the fingerprint sensor will go to sleep.
8. For best results, apply clean fingers to the fingerprint sensor.
10

Other manuals for ZKTeco AL10B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZKTeco AL10B and is the answer not in the manual?

ZKTeco AL10B Specifications

General IconGeneral
BrandZKTeco
ModelAL10B
CategoryLocks
LanguageEnglish

Related product manuals