CMP-300
User Manual
Page | 22 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
8) Barrier gate spring and the corresponding boom length type:
9) Study/Delete Remote Control Code
Study code:
• In the Stop state, press the “Study” button on the main controller until
the REMOTE indicator is ON and then release it.
• Then press any button on the remote control, the REMOTE indicator
turns OFF. In this process, the code of studying will be completed.
Delete code:
• To process the Code deletion, in the STOP state, press the Study button
on the main controller until the REMOTE indicator is ON, continue to
press the ‘Study’ button, and hold on until the REMOTE indicator is OFF.
• Note: All the codes will be deleted in this process).
Note: One barrier can only study to 20 remote controls. The matching remote
control will be studied already, and there is no need to read again.
To Next Page
Loading...
Need help?
General
