To Next PageTo Next PageWhat to do if the ZKTeco Turnstiles indicator is not lighted?
If the indicator light on your ZKTeco Turnstiles doesn't illuminate when the equipment is powered on, check the connection cable and power cable for any damage. Also, ensure that the wiring is not loose, as the problem might be with the power supply or circuit.
General| Lane Width | 600mm |
|---|---|
| Ingress Protection | IP54 |
| Arm Material | Stainless Steel |
| Operating Temperature | -28°C to 60°C |
| Power Consumption | 60W |
| Unlocking Time | 0.2s |
| Power Supply | AC 100-240V, 50/60Hz |
| Working Humidity | 5% to 80% |
| Working Environment | Indoor/Outdoor |
| Housing Material | Stainless Steel |
| Throughput | 30 persons per minute |
| Humidity | 5% to 80% |
| Throughput Rate | 30 persons per minute |
| Communication Interface | RS485, TCP/IP |
| Working Temperature | -28°C to 60°C |
