6
Preparing the Refrigerator Enclosure
IMPORTANT SAFETY INSTRUCTIONS
Please observe the following rules:
• The dedicated circuit breaker for this unit must be easily accessible in case of an emergency;
it must not be hidden behind the product.
• The electrical plug and cord must not touch the back surface of the product. Otherwise, it
may get damaged due to the vibration of the product.
• Do not connect the plugs of other appliances behind this product.
• If the humidity level is high where the product is used, corrosion may occur on the outer
surface of the product. Keep the area where the unit will be installed dry and well-cleaned
to avoid corrosion.
CAUTION
To avoid the risk of electric shock:
• Connect the plug to a dedicated grounded electrical outlet.
• Do not remove the ground terminal of the plug.
• Do not use adapters.
• Do not use extension cables or cords.
ATTENTION
Do not install your refrigerator:
• In open areas.
• In environments where water is dripping.
• In environments where temperature is lower than 61°F (16°C).
To Next Page
Loading...
