8
Care and Maintenance
Removing Inlet Throat Adaptor
If you are experiencing high levels of larger debris that clog the throat
of the cleaner simply remove the inlet throat adaptor to enhance the
size of the AX10 Activ throat inlet, thus allowing larger debris to be
picked up by the cleaner.
1. Grasp adapter as shown, inserting finger into adapter
hole.
2. Remove by lifting up rear edge first.
3. To re-install simply click the front edge first then push
rear into place.
®
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: info@rainbowpoolproducts.com.au
Web: www.rainbowpoolproducts.com.au
To Next Page
Loading...
Need help?
General
