Zodiac Edenpac 2 User Manual

1
CONTENTS
1 General.................................................. 2
1.1 General terms of delivery..............................2
1.2 Voltage.......................................................... 2
1.3 Water treatment.............................................2
2 Description............................................ 2
2.1 Presentation................................................... 2
2.1.1 Edenpac 2, 3, 4 and 5
2.1.2 Edenpac 6
2.2 Dimensional characteristics........................... 5
2.2.1 Edenpac 2,3, 4 and 5
2.2.2 Edenpac 6
3 Installation............................................ 7
4 Connections .......................................... 9
4.1 Access to the electrical card .............................9
4.1.1 Edenpac with single fan
4.1.2 Edenpac with double fan
4.2 Hydraulic connections......................................10
4.3 Electric connection...........................................11
5 Regulator operation............................. 12
5.1 Presentation ...................................................... 12
5.2 Setting the target temperature...........................12
6 Starting up............................................ 13
6.1 Check................................................................13
6.2 Start up the heat pump...................................... 14
6.3 Checking...........................................................14
6.4 Fault and state display ......................................15
6.5 Winter storage .................................................. 16
7 Maintenance instructions.................... 16
8 Recycling the product.......................... 16
9 Electrical diagrams.............................. 17
9.1 Electrical diagram of connection
Interface card.................................................... 17
9.2 Electrical diagram EdenPAC single-phase.......18
9.3 Electrical diagram EdenPAC three-phase.........19

Zodiac Edenpac 2 Specifications

General

Brand	Zodiac
Model	Edenpac 2
Category	Heat Pump
Language	English

Summary

1 General

1.1 General terms of delivery

Details terms of delivery, risk, and handling instructions for the equipment.

1.2 Voltage

Specifies the importance of checking appliance voltage against the mains voltage provided on site.

1.3 Water treatment

Outlines recommended water parameters (chlorine, bromine, pH) for appliance compatibility and performance.

2 Description

2.1 Presentation

Presents the heat pump unit and lists the contents found after unpacking, including accessories.

2.2 Dimensional characteristics

Provides detailed dimensions of the appliance, both with and without packaging, and its weight.

3 Installation

Tools required for installation

Lists the necessary tools for carrying out the installation of the heat pump unit.

Choose the appliance installation site

Provides criteria and clearance requirements for selecting an optimal and safe installation location.

4 Connections

4.1 Access to the electric card

Explains how to access the electrical connection card for both single and double fan units.

4.2 Hydraulic connections

Details how to connect the appliance's water inlet and outlet, including bypass configurations.

4.3 Electric connection

Covers power supply, cable section, protection, and wiring configurations for electrical connection.

5 Regulator operation

5.1 Presentation

Introduces the digital thermostat, its components, and the basic setting principle for pool heating.

5.2 Setting the target temperature

Describes the procedure for adjusting the target temperature using the regulator's keys.

6 Starting up

6.1 Check

Lists essential checks to perform before starting the heat pump to ensure correct installation and safety.

6.2 Start up the heat pump

Guides through the step-by-step process of switching on and starting the heat pump.

6.3 Checking

Details checks to verify the heat pump stops heating correctly under specific conditions.

6.4 Fault and state display

Explains the meaning of fault messages and status indicators displayed by the regulator.

6.5 Winter storage

Provides instructions for preparing the unit for winter storage to prevent damage and maintain warranty.

7 Maintenance instructions

Tasks to be carried out by a qualified and authorised person

Lists annual maintenance tasks that must be performed by qualified personnel for the heat pump.

9 Electrical diagrams

9.1 Electrical diagram of connection interface card

Shows the wiring diagram for the connection interface card of the heat pump.

9.2 Electrical diagram EdenPAC single-phase

Provides the electrical schematic for the EdenPAC single-phase heat pump models.

9.3 Electrical diagram EdenPAC three-phase

Provides the electrical schematic for the EdenPAC three-phase heat pump models.