Zodiac Edenpac 3 User Manual (English)

Other manuals for Zodiac Edenpac 3

Questions and Answers:

C
Christine SuttonAug 17, 2025
What causes high or low pressure fault in the refrigerating circuit of a Zodiac Heat Pump?
- J
  Jacob TaylorAug 17, 2025
  A high or low pressure fault in the refrigerating circuit of your Zodiac Heat Pump can occur due to: * A mixture of water and air passing through the appliance. In this case, purge the hydraulic circuit. * Refrigerant overload. Consult a ZPCE-approved technician to check the refrigerant level. * Insufficient refrigerant. Consult a ZPCE-approved technician to look for leaks and refill refrigerant.
M
Megan FarleyAug 19, 2025
What causes a high pressure fault in the refrigerating circuit of a Zodiac Edenpac 3?
- A
  Anthony DiazAug 19, 2025
  A high-pressure fault in the refrigerating circuit of your Zodiac Heat Pump may be due to: * Water and air mixture passing through the appliance. To resolve this, purge the hydraulic circuit. * Refrigerant overload. Consult a ZPCE-approved technician to check the refrigerant level.
G
gonzaleskeithAug 22, 2025
What causes a low pressure fault in the refrigerating circuit of a Zodiac Edenpac 3?
- R
  Robert GibsonAug 22, 2025
  A low pressure fault in the refrigerating circuit of your Zodiac Heat Pump is caused by insufficient refrigerant. To resolve this, consult a ZPCE-approved technician to look for leaks and refill refrigerant.
T
Tanner EvansAug 25, 2025
What causes a voltage error on my Zodiac Heat Pump?
- K
  Kevin NortonAug 26, 2025
  A voltage error on your Zodiac Heat Pump indicates insufficient network power. Check the main power line and consult with the electrical network supplier.
M
Maria GonzalezAug 28, 2025
What causes a phase order fault on a Zodiac three-phase heat pump?
- S
  Steven MeyersAug 28, 2025
  A phase order fault on your Zodiac three-phase heat pump can happen if: * There's incorrect wiring at the unit supply terminals. Check the wiring. * The electrical supplier modified the phase order. Contact your local electricity supplier. * There's a temporary failure of one or several phases.
R
Rebecca GonzalezAug 30, 2025
Why does the anti-frost safety trigger on my Zodiac Edenpac 3?
- K
  Kelly LopezAug 30, 2025
  The anti-frost safety on your Zodiac Heat Pump may trigger if the outside temperature is too low (below +5°C). Wait for a natural rise in the outside temperature.
E
Erin SandersSep 2, 2025
What does a control sensor fault mean on my Zodiac Heat Pump?
- A
  armstrongterrySep 2, 2025
  A control sensor fault in your Zodiac Heat Pump means the sensor is either defective or disconnected. Replace or reconnect the sensor.
K
Karen Hudson DVMSep 5, 2025
What does an anti-frost sensor fault mean on my Zodiac Edenpac 3?
- K
  Kristen OsbornSep 5, 2025
  An anti-frost sensor fault on your Zodiac Heat Pump means the sensor is either defective or disconnected. To fix this, replace or reconnect the sensor.
A
Allen PhillipsSep 7, 2025
What does a defrost sensor fault mean on my Zodiac Heat Pump?
- J
  Jenna CaseySep 8, 2025
  A defrost sensor fault on your Zodiac Heat Pump indicates that the sensor is either defective or disconnected. Replace or reconnect the sensor.
M
Mrs. Margaret DaltonSep 12, 2025
Why is the anti-frost protection heater on my Zodiac Edenpac 3 Heat Pump activated?
- D
  Denise AndersonSep 12, 2025
  The anti-frost protection heater on your Zodiac Heat Pump activates when the outside temperature is too low (below +3°C) and the compressor is OFF. Wait for a natural rise in the outside temperature.