Page 3
ENGLISH
Owner’s Manual
|
Zodiac
®
MX Pool Cleaner
Page 2
ENGLISH
Zodiac
®
MX Pool Cleaner
|
Owner’s Manual
To ensure prompt warranty service, should it be required, please:
• Complete and return the Zodiac Warranty Card.
• Record your purchase information.
• Attach a copy of your purchase receipt to this document.
Date of Purchase: ___________ Purchased From: __________________________________
Serial Number (located under the hood) ___________________________________
If service is required, simply present your manual with the attached receipt at any Zodiac waranty center.
For customer service or support:
Zodiac Pool Systems, Inc. 2620 Commerce Way, Vista, CA 92081-8438 1-800-822-7933
Zodiac Pool Systems Canada, Inc.
2115 South Service Road West, Unit 3, Oakville ON L6L 5W2 Canada 1-888-647-4004
Important Information
Notice for Vinyl Liner Pools: Before installing your pool cleaner, examine the interior of your pool carefully. If the vinyl
liner is brittle or has stones, wrinkles, roots or metal corrosion in contact with the underside of the liner, or has damage to the
base material or supporting walls, do not install the cleaner before having a qualified professional perform the necessary repairs
or liner replacement. Zodiac Pool Systems, Inc. (Zodiac) will not be responsible for liner damage caused by a cleaner
which is in disrepair, pattern removal from a vinyl liner, or a cleaner used in a pool having an aged or deteriorated liner.
Please see Limited Warranty.
• To help prevent suction entrapment accidents, wall vacuum fittings should have a safety vac lock installed.
Contact your builder or retail pool professional for details.
• Clean the skimmer basket, pump basket and pool filter before installing the cleaner and on a regular basis
thereafter.
• Always disconnect the cleaner from the pool wall or skimmer before cleaning or backwashing the pool
filter. After cleaning or backwashing, let the filtration system run for at least five (5) minutes before
re-connecting the cleaner.
• Remove the cleaner from the pool before chemical or shock treatments. Wait a minimum of four (4) hours
after super chlorination before re-installing the cleaner.
WARNING
RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED CAN RESULT IN SERIOUS
INJURY OR DEATH. Ensure that your vacuum suction fittings installed in your pool for connection of your suction-side pool
cleaner are certified as being compliant with applicable safety standards such as IAPMO SPS 4. Do not block the suction fittings with
any part or your body. Do not expose your hair, loose clothing, jewelry, etc. to any suction outlet fittings in the pool/spa.
Read owner’s manual completely before operating the cleaner.
Remove cleaner before entering the pool.
Do not operate outside of the pool.
Do not let children play with cleaner.
Introduction
Congratulations on the purchase of your new Zodiac pool cleaner. Before installing your cleaner, please check
the box to ensure all parts are included (Figure 1). If any components are missing, contact:
Zodiac Customer Support 1-800-822-7933 (USA)
1-888-647-4004 (Canada)
Always insist on genuine Zodiac replacement parts. Non-Zodiac parts are not made to our specifications and
may have an adverse effect on the operation of your cleaner, or may even damage it. Exploded parts diagrams
and list of spare parts can be found at: www.ZodiacPoolSystems.com
Cleaner Components Shipped in the Box
To Next Page
Loading...
