To Next Page
S
Sandra GatesJul 27, 2025
Why does my Zodiac Controller display a high value or unstable measurement?
- MMichael SanchezJul 27, 2025
If your Zodiac Controller consistently shows a high value or unstable measurements, several factors could be at play. First, examine the electrode connection cable for any damage. Second, check for air bubbles in the electrode membrane; if present, gently shake the electrode in an upright position to allow the bubble to rise to the top. Third, the electrode may be worn and require replacement. Finally, reduce the distance between the appliance and the sensor, especially if the connection cable is too long or near an electrical cable, which can cause interference.
General
