EasyManua.ls Logo

Zodiac TX20 User Manual

Zodiac TX20
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TORNAX Robotic
Pool Cleaners
EP34--
EP35--
WARNING
H0585900 Rev A
OWNER'S MANUAL
FOR YOUR SAFETY - For anything other than the routine cleaning and maintenance described in this
manual, this product must be serviced by a contractor who is licensed and qualified in pool equipment
by the jurisdiction in which the product will be installed where such state or local requirements exist. In
the event no such state or local requirement exists, the maintainer must be a professional with sufficient
experience in pool equipment installation and maintenance so that all of the instructions in this manual
can be followed exactly. Improper installation and/or operation will void the warranty.
Question and Answer IconNeed help?

Do you have a question about the Zodiac TX20 and is the answer not in the manual?

Zodiac TX20 Specifications

General IconGeneral
Ultrasonic Frequency42 kHz
Power35W
Power SupplyAC 110-120V, 60Hz
Timer Settings480 seconds
Capacity600 ml

Summary

Important Safety Instructions

Prevent Electrical Shock

Essential warnings and precautions to avoid electrical hazards while using the pool cleaner.

Prevent Child Injury and Drowning

Safety guidelines to protect children and prevent drowning incidents related to the pool cleaner.

General Cautions for Pool Equipment

Important cautionary notes to prevent damage to pool equipment or personal injury.

Vinyl Liner Pool Usage Caution

Specific advice regarding potential surface wear on vinyl liner pools.

Getting Started

General Specifications

Technical data and specifications for the Zodiac robotic pool cleaner models.

Unpacking and Component Check

Instructions for unpacking the pool cleaner and verifying all contents are present.

Cleaner Control Unit Overview

Details about the cleaner's control unit, including its features and indicators.

Connecting to Power Source

Safe procedures for connecting the pool cleaner's control unit to the electrical supply.

Operation

Submerging the Cleaner

Step-by-step guide on how to properly submerge the cleaner in the pool water.

Running the Cleaner

Instructions on how to start and operate the pool cleaner for effective cleaning.

Stopping and Removing from Pool

Procedures for safely stopping the cleaner and removing it from the pool.

Rinsing the Cleaner

Guidelines for rinsing the cleaner with water after each cleaning cycle.

Cleaning the Filter Canister

Detailed instructions on how to clean the filter canister after each use.

Storing the Cleaner

Proper methods for storing the pool cleaner when not in use.

Maintenance

Cord Tangling Prevention

Procedures to prevent and manage power cable tangling after cleaning cycles.

Replacing the Brushes

Guide on identifying worn brushes and replacing them for optimal cleaner performance.

Replacing Tracks

Step-by-step instructions for removing old tracks and installing new ones.

Troubleshooting

Using the Information LED

Explanation of information LED flashing codes and their corresponding solutions.

General Troubleshooting Guide

Common problems, their causes, and solutions for cleaner operation issues.

Related product manuals