Zodiac VORTEX-PRO VX50 4WD - Cleaning and Maintenance; Cleaning the Filter Canister

3. Press and hold for 3 to 5 seconds to
delete programming for the selected day.
Press
to exit.
To Cancel All Programs:
1. Press
to make sure you have exited
the Programming Menu.
2. Press and hold
to delete all
programming in the control box.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
Section 6. Cleaning and
Maintenance
WARNING
Toavoidelectricshockandotherhazardswhich
couldresultinpermanentinjuryordeath,disconnect
(unplug)thecontrolboxfromthepowersource
beforeperforminganycleaningandmaintenance.
6.1 Cleaning the Filter Canister
Theltercanistershouldbecleanedattheendofeach
cycle.
1. Make sure the control box cable is disconnected
fromtheelectricaloutletortheoatingcable
has been disconnected from the control box.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. Toremovetheltercanisterassemblyfromthe
cleaner, follow steps 5 through 8.
5. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 27).
2
1
Figure 27. Lift Cleaner Cover
6. Removetheltercanisterassemblyfromthe
body (3), as shown in Figure 28.
H0516700_REV C
16