- 11 -
Basic Bread
(Basic, Quick)
Basic Steps
BASIC BREAD (BASIC, QUICK)
6. Select the desired setting.
1) Press the SELECT COURSE key to set the arrow ( ) to "Basic" or "Quick"
2) Press the CRUST CONTROL
key to set the arrow ( ) to either Light, Medium or Dark to choose the
crust you want.
3) Press the STAR
T/REST key.
• The Operation Light will go on and the first process is shown
(i.e.PREHEA
T)
•
As the process continues, the indication advances from PREHEAT,
KNEAD, RISE then to BAKE.
•
The ADD indicator will flash for five minutes until the KNEAD
process is complete.
When it’
s time to add ingredients such as raisins or
nuts, the unit will beep for the first 30 seconds of the indicator flashing.
Open the lid and add appropriate ingredients according to the recipe.
• The unit will count down remaining time at one-minute intervals until
the bread is done.
7. Beeps tell you the bread is done.
(1) When baking is complete, beeps alert you that the
bread is ready and the operation lamp will turn off.
(2) Press and hold the START/RESET key.
NOTE: This unit has a convenient function to prevent it
from resetting even if you accidentally press the
START/RESET key during the baking cycle.
(3) Remove the Baking Pan.
Open the Lid and use oven mitts to pull the Baking
Pan toward you by grasping the Pan's shorter Flanges.
This will unlatch the spring so you can lift the Pan to
remove.
(4) If the START/RESET key is not pressed after the
baking cycle is complete (after beeping stops), the
unit automatically goes into the KEEP WARM mode
for 60 minutes. Baking Pan should be removed as
soon as possible to avoid getting soggy.
(5) When the KEEP WARM cycle is over, the Display
appears as shown.
8. Remove the bread.
Turn the Baking Pan over and shake the
loaf out. If the Kneading Blade remains in
the bottom of your loaf, allow the loaf to
cool then use a plastic spoon or rubber
spatula to remove the Blade.
If the bread is difficult to remove, let the
Baking Pan cool for 10 minutes.
However, the bread may become soggy if
you leave it in the Baking Pan longer.
9. Be sure to unplug after using.
Do not tug on the Power Cord.
COMPLETE
COMPLETE
KEEP WARM
COMPLETE
!CAUTION!
The unit is extremely hot
when baking. Be careful.
!CAUTION!
Do not place a hot
baking pan on top of the unit
or any heat-sensitive material.
Damage to the unit or material
may result.
!CAUTION!
Be careful not to
burn yourself.
To Next Page
Loading...
Need help?
General
