What to do if ZOLL Medical Equipment does not run on battery?
If your ZOLL Medical Equipment device isn't running on battery, first plug it into an appropriate outlet to charge, ensuring the External Power Icon is displayed. Also, verify that the power source is live. To maximize run time, charge the battery for approximately 2 hours before using it on battery power.
How to fix ZOLL 330 Medical Equipment that does not turn on?
If your ZOLL Medical Equipment device doesn't turn on, ensure it's properly connected to an external power source. To confirm the power source is working, plug another device into the same outlet.
What to do if ZOLL 330 Medical Equipment pump is running, but there is no vacuum?
If the pump is running but there is no vacuum in your ZOLL Medical Equipment, check that all suction tubing is properly connected and inspect the suction tubing connections for any leaks or damage. Also, check if the canister is full; if it is, remove and replace it according to section 3.2. Finally, ensure that all ports on the collection canister are appropriately sealed.
Why ZOLL 330 pump runs but the device does not reach a high vacuum level?
If the pump runs but your ZOLL Medical Equipment device does not reach a high vacuum level, use the Parameter Buttons and Rotary Encoder to increase the vacuum level by turning clockwise. Also, check the device for any leaks.
General| Device Type | Automated External Defibrillator (AED) |
|---|---|
| Waveform | Rectilinear Biphasic |
| Dimensions | 9.5 x 11.5 x 3.5 inches (24.1 x 29.2 x 8.9 cm) |
| IP Rating | IP55 |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Altitude | Up to 15, 000 feet |
| Display | LCD screen |
| Voice Prompts | Yes |
| Connectivity | USB |
| CPR Feedback | Real CPR Help provides real-time feedback on compression rate and depth |
To Next Page
