Need help?Do you have a question about the ZOLL X Series and is the answer not in the manual?
General| Type | Defibrillator/Monitor |
|---|---|
| Display | Color LCD |
| ECG Monitoring | Yes |
| Pacing | Yes |
| SpO2 Monitoring | Yes |
| NIBP Monitoring | Yes |
| Defibrillator Type | Biphasic |
| EtCO2 Monitoring | Optional |
| Data Storage | Yes |
| Battery | Rechargeable Lithium-ion |
| CPR Feedback | Real CPR Help |
| Energy Selection | 1-360 J |
| Pacing Rate | 30 – 180 ppm |
| Pacing Output | 0 – 140 mA |
| Display Size | 6.5 inches |
| Invasive Pressure Monitoring | Optional |
| Temperature Monitoring | Optional |
| Wireless Connectivity | Wi-Fi, Bluetooth |
Covers essential safety precautions for operators and patients during device operation.
Provides steps for acknowledging patient alarms, checking the patient, and setting appropriate alarms.
Describes how to access and specify alarm options through the Supervisor parameter control panel.
Explains how to enable/disable NIBP alarms and set upper/lower limits for pressure measurements.
Describes the recommended method of operation in AED Mode, complying with AHA/ERC guidelines.
Explains the ECG analysis process, including warnings about patient movement and interpretation of results.
Provides instructions for delivering a shock, including safety warnings and CPR guidance.
Details the emergency defibrillation procedure using paddles, including safety warnings.
Explains how to select the desired energy level for defibrillation, including default settings.
Provides instructions for delivering the shock, including safety warnings and applying paddle force.
Explains how the X Series unit provides feedback on CPR quality using chest compression sensor data.
Details specifications for Heart Rate Alarms, Lead Fault Alarms, Physiological Alarms, and Invalid Operation Alert Tones.
To Next Page
