ZOLL X Series User Manual

Chapter 22 Communications
22-16 www.zoll.com 9650-001355-01 Rev. M
WiFi Access Point Profiles
To select and modify Wi-Fi Access Point Profiles, use the navigation keys to highlight and
select Configure Wi-Fi.
A green check mark indicates the selected access point. Use the navigation keys to select a
different profile, or to add, edit or delete other profiles.
Note: Selecting a profile in this list allows you to edit or delete the profile. It does not make a
profile the active Wi-Fi profile selection. See “Selecting a Pre-Configured Access
Point Profile” on page 22-5 for information on making a Wi-Fi profile active.
The Power Management option allows you to enable or disable Wi-Fi power management. The
Power Management option is enabled by default.
To add a new Access Point Profile:
Use the navigation keys to highlight and select Add. You can enter the type of network setting,
profile name, SSID, authentication, and security key.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth