ZOLL X Series User Manual

9650-001355-01 Rev. M X Series Operator’s Guide 20-1
Chapter 20
See-Thru CPR
See-Thru CPR is an optional feature in the X Series.
WARNING! The See-Thru CPR filter works only when the X Series defibrillator is monitoring CPR
in Manual mode.
The See-Thru CPR filter stops if:
— The unit is in pace mode.
— Patient impedance is invalid.
— ZOLL OneStep CPR electrodes, OneStep Complete electrodes or CPR-D-padz are no
longer detected.
The See-Thru CPR filter will not remove all CPR artifact. Always stop CPR to verify
the patient’s ECG rhythm before making treatment decisions.
The See-Thru CPR filter does not operate during ECG rhythm analysis. Always stop
chest compressions during ECG rhythm analysis to avoid incorrect results caused by
the presence of CPR artifact.
Diagnostic bandwidth is never applied to the See-Thru CPR waveform.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth