ZOLL X Series User Manual

9650-001355-01 Rev. M X Series Operator’s Guide 10-1
Chapter 10
Pulse CO-Oximetry (SpO
2
)
The X Series SpO
2
input is Type CF defibrillator proof.
This chapter describes how to use the X Series unit to monitor Pulse CO-Oximetry (SpO
2
), as
well as the optional features: SpCO, and SpMet, and SpHb, SpOC PVI, and PI.
The X Series pulse CO-Oximeter continuously and noninvasively measures the following at a
peripheral site, such as the foot, toe, or finger:
• Oxygen saturation of arterial hemoglobin (SpO
2
)
• Carboxyhemoglobin saturation (SpCO)
• Methemoglobin saturation (SpMet)
• Total Hemoglobin (SpHb)
• Oxygen Content (SpOC)
• Pleth Variability Index (PVI)
• Perfusion Index (PI)
This monitoring gives information about the cardiac and respiratory systems, and provides
details of oxygen transportation in the body. It is widely used because it is noninvasive,
continuous, easily applied, and painless.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth