ZOLL X Series User Manual

Chapter 6 Monitoring ECG
6-10 www.zoll.com 9650-001355-01 Rev. M
ECG System Messages
When monitoring ECG, the X Series unit may display the following messages:
Note: If an ECG Monitoring cable is intentionally disconnected, you can disable the Lead
Fault alarm by Pausing (Suspending) the alarm audio. See “Pausing (Suspending)
Alarms” on page 5-6 for more information.
System Message Cause
LEAD FAULT The current ECG source lead is defective (check
lead and replace, if necessary).
-- OR --
An unavailable waveform source has been specified
for the trace display (check specified waveform
source and correct, if necessary).
PADDLE FAULT or CABLE FAULT Check the pad, paddle or cable and replace if
necessary.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth