ZOLL X Series User Manual

Chapter 12 Monitoring Temperature
12-6 www.zoll.com 9650-001355-01 Rev. M
Temperature System Messages
The X Series unit may display the following messages when monitoring Temperature.
Note: The temperature function performs a self test when initially powered on and also
performs system tests automatically, every 10 seconds, while this function is active.
System Message Cause
CHECK PROBE The temperature probe is disconnected. Check probe
and reconnect it.
PROBE FAILURE The temperature probe is defective. Replace the
Temperature probe.
TEMP DISABLED A system error has occurred. The X Series unit cannot
take temperature measurements and should be serviced.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth