ZOLL X Series User Manual

Defibrillator Controls and Indicators
9650-001355-01 Rev.M X Series Operator’s Guide 2-5
Display Screen
The front panel includes a color display which shows:
• Date and time
• Patient mode
• Battery status indicator
• Time elapsed (since unit was turned on)
• Quick access keys
• Waveform source
• Color-coded waveforms and ECG lead identifiers
• SpO
2
numeric data
• Heart rate numeric data
• Respiration rate numeric data
• Temperature numeric data
• Non-invasive blood pressure numeric data
• EtCO
2
numeric data
• Invasive pressure numeric data
• The selected energy, charging status, and delivered energy for defibrillation and
synchronized cardioversion
• The output current and stimulus rate for pacing
• Messages and prompts
The image below shows the layout of parameter values, waveforms, system data, and quick
access key labels.
Color coding
To differentiate information for various parameters, the unit displays each type of information
in a specific user-configurable color.
Date and time Patient mode
Battery status Time elapsed
Quick
access
keys
Message
Waveform
SpO
2
data
CO
2
data
Respiration rate
NIBP data
Heart rate
Current temp
Adult
2015-04-10 12:34:56
00:17:43
I, II,
III...
SYNC
12
CO
2
R
1 cm/mV
II
HR bpm
80
121
79
(96)
NIBP mmHg
38
12
BR
CO2 mmHg
SpO2 %
97
T1 ºF
98.6
EtCO2 Low AlarmSpO2 Check Sensor
Some alarm limits disabled.
Status queue

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth