ZOLL X Series User Manual

12-Lead ECG Monitoring Setup
9650-001355-01 Rev. M X Series Operator’s Guide 14-7
Connecting the 12-Lead Cable
Connect the 12-Lead ECG cable to the ECG input connector on the left side of the unit as
follows:
Figure 14-2 Connecting the 12-Lead ECG Cable
Observing the 12-Lead Waveform Traces
To observe the 12-Lead waveform traces, press . The screen displays all twelve waveform
traces, with the size displayed above the waveform traces:
12
06/06/2011 12:34:56
Adult
00:17:43
12
Exit
V6
V5
V4
V3
V2
V1
aVF
aVL
aVR
III
II
1 mV/cmI
12
HR bpm
80
NIBP mmHg
121
79
(96)
EtCO2 mmHg
12
BR
38
SpO2 %
97
SpMet 20.0
T1 ºF
98.6

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth