ZOLL X Series User Manual

9650-001355-01 Rev. M X Series Operator’s Guide 21-1
Chapter 21
Patient Data
This chapter describes procedures for storing, viewing, and transferring patient data from the X
Series to an external system, such as a personal computer or handheld device.
Note: Before deleting log files from the X Series, view the files on a personal computer to
verify that they have been successfully transferred.
Note: Data transfers will not be successful if the USB flash storage device is full or does not
have sufficient memory available. Always use a USB flash storage device that has at
least 128 MB available.
WARNING! Do not connect non-isolated equipment to the USB port while monitoring a patient.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth