What to do if ZOLL Medical Equipment does not run on battery?
If your ZOLL Medical Equipment device isn't running on battery, first plug it into an appropriate outlet to charge, ensuring the External Power Icon is displayed. Also, verify that the power source is live. To maximize run time, charge the battery for approximately 2 hours before using it on battery power.
How to fix ZOLL 330 Medical Equipment that does not turn on?
If your ZOLL Medical Equipment device doesn't turn on, ensure it's properly connected to an external power source. To confirm the power source is working, plug another device into the same outlet.
What to do if ZOLL 330 Medical Equipment pump is running, but there is no vacuum?
If the pump is running but there is no vacuum in your ZOLL Medical Equipment, check that all suction tubing is properly connected and inspect the suction tubing connections for any leaks or damage. Also, check if the canister is full; if it is, remove and replace it according to section 3.2. Finally, ensure that all ports on the collection canister are appropriately sealed.
Why ZOLL 330 pump runs but the device does not reach a high vacuum level?
If the pump runs but your ZOLL Medical Equipment device does not reach a high vacuum level, use the Parameter Buttons and Rotary Encoder to increase the vacuum level by turning clockwise. Also, check the device for any leaks.
General| Device Type | Automated External Defibrillator (AED) |
|---|---|
| Waveform | Rectilinear Biphasic |
| Dimensions | 9.5 x 11.5 x 3.5 inches (24.1 x 29.2 x 8.9 cm) |
| IP Rating | IP55 |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Altitude | Up to 15, 000 feet |
| Display | LCD screen |
| Voice Prompts | Yes |
| Connectivity | USB |
| CPR Feedback | Real CPR Help provides real-time feedback on compression rate and depth |
Provides a brief description of the ZOLL 330 Multifunction Aspirator.
Explains how to use the service manual for safe and effective repair of the aspirator.
Lists documents related to the ZOLL 330 Multifunction Aspirator Service Manual.
Provides information on how to obtain and review service manual updates.
Describes symbols found on the aspirator itself, its display, or within the manual.
Details the symbols displayed on the aspirator's Graphical User Interface during operation.
Explains the typographical and formatting conventions used throughout the manual.
Provides a list of abbreviations and acronyms used in the service manual.
Outlines general warnings for personnel involved in servicing the aspirator.
Details important warnings related to power connection and grounding for the aspirator.
Provides critical safety warnings for technicians servicing the aspirator.
Information on how to contact the ZOLL Technical Service Department for assistance.
Instructions and procedures for returning a device to the Technical Service Department.
Introduction to maintenance test procedures for the ZOLL 330 Aspirator.
Guidelines to observe when performing maintenance tests on the aspirator.
Steps to take before starting the maintenance tests, including kit assembly.
Details the contents of the 330 PM (Preventive Maintenance) Test Kit.
Step-by-step instructions for assembling the test setup for maintenance.
Procedures and expected observations for cosmetic and hardware inspections.
Procedures and acceptance criteria for performance testing of the aspirator.
Instructions for performing the bleed valve functional test.
Introduction to error messages and troubleshooting for the aspirator.
Describes service codes, their associated alarms, and resolutions for the aspirator.
Explains the nature of service codes and their priority levels.
A comprehensive list of service codes, alarm names, and mitigation steps.
Instructions for disassembling and reassembling the aspirator unit.
Lists the necessary tools and equipment for part replacement procedures.
Essential safety precautions to follow before and during part replacement.
General guidelines to observe when performing replacement installation procedures.
Detailed steps for removing and replacing the aspirator's battery compartment.
Instructions for replacing the battery compartment cover.
Step-by-step guide for removing and installing the aspirator battery.
Procedure for removing and installing the back cover of the aspirator.
Instructions for replacing the power input assembly of the aspirator.
Procedure for replacing the exhaust muffler block and baffle.
Instructions for replacing the foam component of the exhaust muffler.
Detailed steps for installing the power interface module.
Procedure for removing and installing the Smart Aspirator Module (SAM).
Step-by-step guide for replacing the vacuum pump assembly.
Instructions for replacing the UIM Adapter Board.
Procedure for removing and installing the UIM Stack Assembly.
Introduction to the replacement parts available for the ZOLL 330 Aspirator.
Information and steps to identify needed replacement parts.
Guidance on how to identify parts using item numbers and pictures.
A comprehensive list of part numbers and descriptions for the aspirator.
Describes the aspirator's functional principles and pneumatic system.
Instructions on using the checklist to record maintenance test results.
A checklist for recording results of cosmetic, performance, and functional tests.
General operational specifications for the ZOLL 330 Aspirator.
Details the aspirator's classification regarding electrical shock and ingress protection.
Specifies compliance with electromagnetic emissions and immunity standards.
Information on maintaining safety and performance regarding electromagnetic disturbances.
Explains the electrical safety classifications (Class I and Class II) of the aspirator.
To Next Page
