Need help?Do you have a question about the ZOLL AutoPulse NXT and is the answer not in the manual?
Details the AutoPulse NXT system's function, intended use, and indications for use.
Specifies intended users and physical characteristics for intended patients.
Lists and identifies the main components of the AutoPulse NXT system.
Describes the battery, charger, band, and interoperability with other ZOLL technologies.
Provides critical warnings and cautions for safe operation and to prevent injury or equipment damage.
Defines symbols used in the manual to convey important safety information.
Details the AutoPulse NXT platform, its function, and key features.
Explains the buttons, indicators, and their functions on the platform's control panels.
Describes 30:2 and Continuous compression modes and how to change them.
Explains how to use the Mute function to silence audio alerts.
Details the components and characteristics of the AutoPulse NXT band.
Step-by-step instructions for correctly attaching the band to the platform.
Step-by-step instructions for safely removing the band from the platform.
Describes the rechargeable battery and procedures for handling new batteries.
Explains how to check battery status and install/remove the battery.
Provides information on expected battery service life and replacement recommendations.
Details the battery charger's function, capabilities, and components.
Guides users on setting up and using the battery charger for optimal battery maintenance.
Step-by-step procedures for charging and removing batteries from the charger.
Explains the charger panel indicators and the battery measurement cycle.
Information on the battery charger's circuit breaker and how to reset it.
Lists the essential materials needed for each treatment session.
Covers initial system setup and strategies for quick deployment.
Detailed instructions on how to operate the system during patient treatment.
Guidance on proper patient alignment and methods for extrication.
Notes on ECG monitoring, defibrillation, and potential artifacts during operation.
Procedures for concluding treatment and preparing the system for subsequent use.
Information on session data, report contents, and downloading performance reports.
Details the Quick Case carry sheet, its dimensions, and how to attach the platform.
Instructions for using the hygiene barrier to maintain cleanliness during use.
Guidance on securing the shoulder restraint for proper patient alignment.
Covers inspection of the platform, battery, and battery charger for damage.
Provides instructions for cleaning system components like the platform, battery, and charger.
Guidance on proper storage, transport, and disposal of the system and its components.
Details the warranty terms, coverage, exclusions, and limitations of liability.
Information on obtaining technical support, and procedures for device return and shipping.
Addresses common platform problems like alert indicators and compression failures.
Solutions for problems related to the band, such as cuts or retraction.
Guides on resolving issues with battery status indicators, charging, and insertion.
Provides solutions for common battery charger malfunctions and alerts.
Specifies operational parameters such as compression rate and displacement.
Details the physical dimensions, weight, and environmental operating conditions of the platform.
Provides physical and environmental specifications for the rechargeable lithium-ion battery.
Details the physical dimensions, weight, and environmental operating conditions of the battery charger.
Covers RF emissions, FCC/IC notices, and electromagnetic immunity compliance.
General| Brand | ZOLL |
|---|---|
| Model | AutoPulse NXT |
| Category | Medical Equipment |
| Language | English |
To Next Page
