1
Getting Started
Introduction to Accessories
Check whether there are the following items in the packaging box of the product:
MID equipment
Operation Manual
Power adapter
type-CUSB cable
Or other accessories
For other accessories, please contact the dealer for purchase
Install SD memory card
This equipment comes with built-in storage. If it is necessary to store more files, such as music,
ringtones, wallpapers, videos, and short messages, the memory space can be expanded by
inserting a memory card. MicroSD memory card is used for this equipment. The steps for
installing the memory card are specifically as below:
1. Make the gold contact of the memory card face down;
2. Push the memory card into the card slot until it locks into place
Our company follows recognized standards for memory cards, but some brands may not be fully
compatible with the equipment.
Battery charging
Before using the equipment for the first time, confirm that the equipment has enough power:
1. Plug the type-CUSB plug at one end of the charger into the type-CUSB interface of the
equipment, and plug the other end of the charger into a standard power socket for charging.
2. When the equipment is shut down and charged, charging animation will appear, and when the
equipment is fully charged, a picture of fully-charged battery will be displayed.
3. If charging is not displayed when the charger is plugged in, please check whether the charger
can be used normally.
Note:
If the equipment is not used for a long time, the battery power will be exhausted. At this
time, the battery needs to be charged for a period of time before being powered on.
To Next Page
Loading...