EasyManua.ls Logo

Zoom 9000 - Page 29

Zoom 9000
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
n TREMOL (Tremolo)
This Effect Type changes the volume of the sound periodically. This gives a tremolo
effect in a range from the conventional tremolo effect, up to a strong clipping effect of
the sound.
[Parameter]
(1) DEPT (Depth): 0 to 10
This parameter determines the depth of the tremolo effect.
(2) RATE (Rate): 0 to 50
This parameter determines the speed of the tremolo effect.
(3) EDG (Edge): 0 to 10
This parameter deforms the tremolo waveform to a trapezoid waveform,
which gives a strong effect up to clipping, by increasing the parameter
value.
Level Level
Time Time
Effect of the EDG Parameter
n STEP
This Effect Type adds an effect in which the tone changes at random, to the direct sound.
This creates an auto-arpeggio-like effect.
[Parameter]
(1) DEPT (Depth): 0 to 10
This parameter determines the depth of the tone change.
(2) RATE (Rate): 0 to 50
This parameter determines the speed of the tone change (rate of
arpeggio).
(3) SPD (Speed): 0 to 1
This parameter speeds up the effect six times for a special effect, by
setting the parameter value to 1.
Helpful hint:
This effect is similar to that obtainable with the sample & hold function of a synthesizer.
Setting the speed to 1 gives a SFX-like-effect to the sound.
28

Related product manuals