g Effect Module 4: Delay (DLY)
This Effect Module adds an echo sound to the direct sound. Only one Effect Type is
available.
n DLY1 (Delay 1)
This Effect Type is a conventional digital delay in which the delay time can be set up to
480 ms.
[Parameter]
(1) DECY (Decay): 0 to 10
This parameter determines the number of repetitions of the delay sound.
The higher the value is, the more repetition time is obtained (about 1 to
1 in terms of echoes).
(2) TIME (Time): 1 to 48
This parameter determines the delay time (intervals between the delay
sounds). To obtain the actual delay time (in ms units), multiply the
parameter value by 10.
(3) MIX (Mix level): 0 to 10
This parameter determines the mix amount of the effect sound with the
direct sound. Setting this value to 0 outputs only the direct sound, while
setting this value to 10 gives a maximum of the effect sounds (delay
sounds).
30
Direct DECAY
Delay
Time
Parameters of DELAY 1
To Next Page
Loading...
