6
Bank
The 9000 calls the desired Patch from a group of four main groups. Each main group is
referred to as a Bank. Use Bank numbers 0 to 4 and Patch numbers 0 to 4 to select the
desired Patch from the desired Bank.
Parameter
The elements which determine the sound of an effect are referred to as parameters.
Parameter values can be set for each Effect Module for making desired Patches with the
9000.
Mode
The functions of the 9000 can be roughly divided into two different groups of functions.
These groups are referred to as “modes” and are described below.
Play mode – In this mode, Patches can be selected and played. When the power is
turned on. The 9000 is automatically set in this mode.
Edit mode – In this mode, the parameters of each Patch can be edited.
To Next Page
Loading...
