To Next PageTo Next Page
Need help?Do you have a question about the Zoom B1on and is the answer not in the manual?
General| Effects | 100 |
|---|---|
| Simultaneous Effects | 5 |
| Looper | 30 seconds |
| Rhythm Patterns | 68 |
| Tuner | Yes |
| Display | LCD |
| Presets | 100 |
| USB | Yes |
| Power | 4 AA batteries or AC adapter |
| Inputs | 1 x 1/4" instrument |
| Outputs | 1/4" phone jack |
| Patch Memory | 100 (10 banks of 10) |
Explains warning symbols and general safety advice for operation, handling, and environment.
Covers safe use of AC adapters, batteries, and connecting cables to prevent accidents.
Provides guidance on cleaning, maintenance, and troubleshooting procedures for malfunctions.
Highlights main features like simultaneous effects, rhythm patterns, looper, amp modeling, and battery life.
Information on downloading effect parameters from the ZOOM website.
Details the controls and indicators located on the top surface of the unit.
Describes the various input/output jacks and connectors on the rear of the unit.
Step-by-step guide on inserting batteries and connecting the guitar cable to power on.
Instructions for connecting the AC adapter and turning the unit on.
Explanation of the eco mode feature that automatically turns off the unit after inactivity.
Details the various indicators and information displayed on the HOME screen.
Defines key terms used in the manual, such as 'Patch' and 'Bank'.
Instructions on how to select and cycle through different patches.
Guidance on navigating and switching between different banks of patches.
Steps to adjust the level (LVL) and name (NAME) of individual patches.
How to choose an effect from the available list on the unit.
Steps to choose the specific type or model of an effect.
Method for enabling or disabling individual effects within a patch.
Explanation of processing limits when combining multiple effects and how to manage them.
Guide to choosing effects by browsing through different categories.
Steps for modifying individual parameter values of selected effects.
How to switch the display between multiple effects in a chain.
Instructions for adding new effects to the effect chain.
Procedure for deleting an effect from the current patch.
How to change the sequence of effects within the patch.
Steps to set the overall output volume level of the unit.
How to set the tempo for rhythms and looper, which also affects other functions.
Procedure for storing the current patch settings into memory.
Instructions on how to exchange the positions of two patches.
How to set the battery type (Alkaline or Ni-MH) for accurate display.
Guide to enabling or disabling the eco mode for automatic power-off.
Setting the duration for the LCD backlight before it turns off.
Procedure for adjusting the contrast of the LCD screen.
Configuring whether patch changes are saved automatically or manually.
Explains how patch changes are handled when the auto save feature is disabled.
How to prepare and select the next patch before switching to it.
Instructions for enabling or disabling the preselect function.
Steps to access the built-in tuner function from the HOME or effect screen.
Guidance on how to tune the bass guitar using chromatic and bass tuner modes.
Procedure for modifying tuner parameters like calibration and type.
Details on setting output, pitch calibration, and tuner types (Chromatic/Bass).
Instructions for configuring drop tuning settings for specific strings.
How to access the rhythm function from the HOME or effect screen.
Procedure for selecting rhythm patterns, adjusting tempo (BPM), and volume (LVL).
Instructions on how to begin playback of the selected rhythm pattern.
A list of available rhythm patterns with their names, time signatures, and numbers.
How to access the looper function from the HOME or effect screen.
Procedure for setting loop recording time, tempo (BPM), and volume (LVL).
Details on manual and metronome-based recording time settings for the looper.
Instructions on how to start recording and play back a recorded phrase.
Method for adding layers to an existing recorded loop.
Procedures for stopping loop playback and clearing the recorded loop.
Procedure for accessing and modifying expression pedal settings.
How to assign and adjust the minimum/maximum values for pedal control.
Steps to calibrate the expression pedal's sensitivity for accurate operation.
Instructions on how to tighten or loosen the pedal's resistance using a hex key.
How to check the current system, preset, and boot firmware versions.
Procedure for downloading and installing the latest firmware via a computer.
Instructions on how to reset the unit to its original factory settings.
Solutions for issues where the unit fails to power on.
Troubleshooting steps for sound output problems.
Tips for reducing or eliminating unwanted noise in the audio signal.
Diagnosing and resolving issues where an effect is not functioning correctly.
Causes and solutions for batteries losing charge quickly.
Troubleshooting steps for when the expression pedal is not working properly.
Details on effect types, simultaneous effects, sampling frequency, and audio conversion.
Technical specifications for input/output levels, impedance, noise, and power requirements.
Information on the physical size and weight of the B1on and B1Xon units.
Guidelines for users to prevent or correct radio frequency interference as per FCC rules.
Statement of compliance with EU directives for EMC, ErP, and RoHS.
Instructions for responsible disposal of electronic waste in accordance with EU regulations.
