Zoom F4 - Boosting Headphone Output to Alleviate Interference from Recorded Sound (HP Digital Boost)

Functions added in Version 3.0
12
Boosting headphone output to alleviate interference from recorded sound (HP Digital Boost)
Boosting headphone output to alleviate interference from recorded sound (HP Digital Boost)
1. Press m.
2. Use e to select OUTPUT , and
press E.
3. Use e to select HP Digital
Boost
, and press E.
4. Use e to adjust the
amount of boost, and press
m.
HINT
The amount of boost can be set from 0 to +24 dB.
NOTE
• In situations where the sound being recorded can be heard at the
headphone monitoring position, sound waves traveling through
the air can interfere with the sound heard from the headphones,
altering the monitored sound. The more the sound heard through
the headphones is delayed and the lower its volume, the greater
the impact of the sound waves.
• HP Digital Boost adds a set boost volume to the adjusted head-
phone volume level, reducing the impact of the sound waves that
travel through the air.
You can set the type of signal sent to the headphone output, MAIN OUT and SUB OUT to either prefader or postfader for each
track.