Zoom F4 - Setting the Input Source (Input Source)

Functions added in Version 3.0
Setting the input source (Input Source)
04
Follow these procedures to set the input source of each track.
1. Press m.
2. Use e to select INPUT , and
press E
3. Use e to select Input
Source
, and press E.
4. Use e to select a track, and
press E.
Setting the input source (Input Source)
HINT
Select ALL to set all the tracks at the same time.
5. Use e to select the input
source, and press E.
Setting value Explanation
Analog Input
This treats signals input through INPUT 1–4 as input
signals.
USB 1, USB 2,
USB 3, USB 4
When AIF with Rec (→ P.19) is set to On,
computer output signals are treated as input signals.
NOTE
• The Input Source cannot bechanged for Inputs 5 and 6.
• When dual channel recording is enabled the Input Sourcecannot
be changed for the dual channel recording tracks.