Zoom F4 - Connecting mics;other devices to Inputs 1-6; Connecting Microphones; Connecting Line Level Equipment

Setting the attack time
This sets the amount of time until limiting starts after the
input signal exceeds the threshold.
5. Use e to select Attack
Time
, and press E.
6. Use E to adjust the time,
and press m.
HINT
This can be set from 1 to 4 ms.
NOTE
This setting can be made when On/Off is set to On (Normal).
Setting the threshold
This sets the level at which the limiter begins operating.
5. Use e to select Threshold ,
and press E.
6. Use e to adjust the
setting, and press
.
HINT
This can be set from −16 to −2 dBFS.
NOTE
This setting can be made when On/Off is set to On (Normal).
Functions added in Version 3.0
Input limiter
08
Input limiter (continued)