Zoom G1 X Four - Editing Effects (EDIT Mode)

5
Editing effects (EDIT mode)
In EDIT mode, you can change the effects used in a patch and adjust their parameters.
Select a patch in MEMORY mode beforehand to edit it in EDIT mode.
1.
Activate EDIT mode.
• Press
.
Unit number
Parameters
Effect name
2.
Select an effect to edit.
• Press
– .
3.
Turn the effect ON/OFF.
• Press the same
– as in step
2 again.
OFF ON
4.
Adjust the effect parameters.
If an effect has 5 or more parameters, use to change the screen.
When the AUTO SAVE function is ON, changes to effects will be automatical-
ly saved. (
P.10)
NOTE
1
2, 3
4