9
Using the MENU
Press
and hold
Change the effect order.
Change the patch memory name.
Copy the patch memory and save it in a different location.
Delete the patch memory.
Select the output device connected to the G2 FOUR/G2X FOUR.
Turn the automatic saving function on/off.
Turn the preselect function on/off.
Turn the ECO mode on/off.
Turn on/off output setting display when the power is turned on.
Adjust the display contrast.
Restore the factory default settings.
Calibrate the expression pedal.
Check the rmware versions.
See the Operation Manual for detailed information about all the functions.
To Next Page
Loading...
