2
①
PLAY MODE selection section
Use this to select the
G6
PLAY MODE. (The selected mode lights.)
②
Parameter knobs
Use these to adjust effect parameters and to make various settings.
③
Touchscreen
Operate the touchscreen to select and set patch memories as well as to make
G6
settings, for
example.
④
TAP switch
Use this to tap the tempo and to turn the tuner on/off.
⑤
Expression pedal
Use this pedal to adjust the volume or a wah effect, for example.
⑥
Footswitches and their function indicators
Use these to select patch memories and banks, turn effects on and off, and operate the looper.
The functions that can be controlled by the footswitches light.
■
Play mode overview
The
G6
has four play modes that can be used as needed while performing.
PLAY MODE Explanation
The looper appears on the touchscreen and can be operated using the footswitches.
Banks and the patch memories in them are shown on the touchscreen, and patch
memories can be selected using footswitches.
Patch memory names are shown with large characters on the touchscreen, and
banks and patch memories can be selected using footswitches.
The effects used in a patch memory are shown on the touchscreen, and each effect
can be turned on/off using footswitches.
Functions of parts
To Next Page
Loading...
