6
1.
Minimize the volume of the amp/monitor speakers.
2.
Set to ON.
This turns the
G6
power on and opens the Effect Board Screen
on the touchscreen.
3.
Raise the volume of the amp/monitor speakers.
By default, ECO mode setting is on, so the power will auto-
matically turn off if no use occurs for 10 hours. ECO mode
can also be turned off.
NOTE
When the
G6
power is turned on, the state when the power was last turned off will be
restored.
HINT
Turning the power on
Adjusting the master level and EQ
2
Touchscreen
■
Adjusting the master level
The volume output from the
G6
can be adjusted.
■
Adjusting the master EQ
In MEMORY, BANK/PATCH or EFFECT BOARD
mode, turn
to open the OUTPUT EQ screen.
Turn a
to adjust the quality of the output
sound accordingly.
Touch
at the top right of the screen to lock the
settings.
Raise
Lower
Low
frequencies
High
frequencies
Low mid
frequencies
High mid
frequencies
To Next Page
Loading...
