7
In EFFECT BOARD mode, the effects and
amp used in the patch memory are shown
on the touchscreen and can be turned on
and off using the footswitches.
Touchscreen
1.
Press repeatedly to select
.
This puts the
G6
into EFFECT BOARD mode.
2.
Touch an effect to enable turning it on/
off with a footswitch.
The touched effect is assigned to a
footswitch.
When effects are assigned, the color
at the base of the footswitch changes
color according to the category.
3.
Press footswitches to turn effects on/
off.
The indicators light when effects are on.
• Regardless of the order that the effects
are touched, they are assigned to the
footswitches from the left.
• After effects have been assigned to all
footswitches, touching other effects will
not assign them.
• Touching a footswitch that has an
effect assigned to it will remove that
assignment.
NOTE
The following operations are also possible
on the touchscreen.
Select the previous
patch memory.
Select the next patch memory.
Open the selected
effect for adjustment.
HINT
Turning effects on and off while playing
To Next Page
Loading...
