Zoom G6 - Page 9

9
Played phrases can be recorded to create stereo loops up to 45 seconds long.
1.
Press repeatedly to select .
This puts the
G6
into LOOPER mode.
2.
Use the looper.
Press when stopped
This starts recording. If a loop has
already been recorded, it starts playing
back.
Press when recording
Recording stops and the loop plays back.
Press when playing back
This starts overdubbing (recording on
top of) the playing loop.
Press when recording
This cancels recording.
Press when playing back
This stops playback.
This erases the last overdub (UNDO).
Press again to restore the erased overdub (REDO).
This deletes the loop.
This shows the looper status.
• READY: No loop recorded yet
• REC: Now recording
• PLAY: Playing back
• STOP: Playback stopped
• CLEAR: Loop cleared
• OVERDUB: Now overdubbing
• UNDO: Last recorded overdub erased
• REDO: Overdub erased by UNDO restored
Touch to open the looper set-
tings screen.
The mono/stereo setting, the
stopping method and the looper
position can be set.
Adjust the looper volume.
Set the recording time.
• MANUAL: Press
to stop recording.
•
♩
×1–64: Set the recording time in quarter notes.
Using an SD card, loops can be recorded for
longer times and saved. Moreover, loops
on the SD card can be recalled for playback
and overdubbing.
HINT
Using the looper while playing
1
2
Touchscreen