8
After using the device
1. Digitally remove (safely eject) the recorder (H4N_SD) from your
computer.
2.a. Physically remove the USB cable your computer.
2.b. Physically remove the SD card from your computer and insert into the
recorder.
3. If applicable, turn off the recorder:
3.1. Slide the power button downward and hold it there for 1 sec. The
screen will show a “GoodBye! See You” message before it turns off.
4. (Optional) Remove and recharge the AA batteries:
4.1. Locate the battery compartment on the back of the recorder.
4.2. Slide the door/cover to the right and remove it.
4.3. Pull the ribbon to remove the two AA batteries.
4.4. Place the batteries into the provide charger and plug it into an outlet.
Helpful tips and usage notes
1. For extended recordings, consider stable positions that don’t require
holding the recorder.
1.a. Try placing it upright or lying on a flat surface.
1.b. Try attaching it to a tripod. The recorder has a 1/
4
in screw thread on
the back.
2. For intervie
w
s, consider using the (boo
k
)mar
k
function of the
R
e
c
button
(section
5
, step 4).
2.1. Press the
R
e
c
button whenever you
’
re going to ask a noteworthy/
pertinent
q
uestion. This action creates a mark.
2.2.
W
hile playing the recording
,
skip among your marks using the
Previous/
R
ewind button and
N
e
x
t/
F
orward button.
3.
Y
ou can use the
F
o
l
de
r
and
Fil
e buttons (on front and belo
w
the screen)
to more quic
k
ly navigate among
les saved on the recorder.
3.i.
F
o
l
de
r
shows the 1
0
secondary folders within the currently selected
recording mode
(
S
t
e
r
eo
,
4
C
H
,
or
MTR)
.
3.ii.
Fil
e shows all
les within the current secondary folder
(F
o
l
de
r01,
etc
)
.
To Next Page
