Why when starting the Zoomlion Excavators, the starter motor doesn’t work?
If the starter motor doesn't work when starting your Zoomlion Excavators, check and repair the wire if there is fault. Change the starter motor if it has fault. Charge the battery if the battery storage is undercharged.
Why is the hydraulic oil too hot in my Zoomlion Excavators?
If the hydraulic oil in your Zoomlion Excavators is overheating, the filter might be blocked, so install a new filter. Another potential cause is blocked radiator or oil cooler. In this case, clean and straighten the blade.
What to do if my Zoomlion ZE205E engine oil pressure indicator light is on?
If the engine oil pressure indicator light is illuminated on your Zoomlion Excavators, several factors could be responsible. Start by checking the engine oil filter; if it's blocked, replace it. Additionally, inspect the oil pipe and joints for looseness or damage that may be causing leaks and repair if needed. Also, the engine oil pressure sensor could be faulty and require replacement, or the indicator itself may be faulty, requiring replacement.
What to do if the hydraulic pressure functions slowly in Zoomlion ZE205E Excavators?
If the hydraulic pressure in your Zoomlion Excavators is functioning slowly, it could be due to several reasons. First, check the oil level and refill the oil collector to the full scale if it is low. Also, if the oil is cold, preheat the machine. If the engine speed is too low, increase the speed.
Why is the vapor squirting from the top of the radiator (the pressure valve) in my Zoomlion ZE205E Excavators?
If vapor is squirting from the top of the radiator (pressure valve) in your Zoomlion Excavators, it could be due to a low coolant level or a water leak. Check the coolant level, add water if necessary, and repair any leaks. Also, a loose fan belt can cause overheating, so check the tension of the fan belt and adjust or replace it. Another potential cause is accumulation of dirty things or lime scale in the cooling system, so change the cooling liquid and wash the interior of the cooling system.
Why even if the engine is running, the charging indicator doesn’t go off in Zoomlion Excavators?
If the charging indicator doesn’t turn off even when the engine is running on your Zoomlion Excavators, change the alternator, because it may be faulty. Also, check and repair the wire, because there may be wire fault.
Why when the engine is running, the illuminating light flashes in Zoomlion Excavators?
If the illuminating light flashes when the engine is running on your Zoomlion Excavators, check the tension of the fan belt and change it, because the fan belt may be loose.
How to fix illuminating light that is still off even if the engine is running at high speed in Zoomlion ZE205E?
If the illuminating light remains off even when the engine is running at high speed on your Zoomlion Excavators, check and repair the loose terminals and open circuits or change batteries, because there may be a wire fault or battery deterioration.
What to do if a hydraulic cylinder doesn’t work in Zoomlion Excavators?
If a hydraulic cylinder isn’t working on your Zoomlion Excavators, repair or change the hydraulic pipeline if it is damaged. Fasten the joint if it is loose. Install a new O-ring if the O-ring in the joint is damaged.
What to do if the oil foams in Zoomlion ZE205E Excavators?
If the oil in your Zoomlion Excavators is foaming, check the oil pipeline for twists or pits. Also, if there is water in the oil, change the oil. Finally, if the oil level is high or low, adjust the oil level.
Details the location and importance of various warning and safety signs on the machine.
Covers basic safety requirements, work site safety, and safety during operation.
Warns against and advises on procedures for any unauthorized modifications.
Details essential safety tools and protective equipment for operators.
Provides an overview of the excavator's main functions and operational scopes.
Illustrates and describes the external components and layout of the excavator.
Details key technical specifications and dimensions for the excavator models.
Identifies and describes the main operating devices and controls within the cab.
Explains the functions and operation of the machine's instrument panels and displays.
Covers essential checks, emergency stops, and basic operations of switches.
Details the operation of various cab accessories like the air conditioner and radio.
Guides on adjusting the driver's seat, rearview mirrors, and seat belts.
Covers checks before starting the engine, coolant, oil, fuel, and horn.
Details on transferring, moving, braking, turning, and operating working devices.
Provides guidance on safe traveling, operating in water, on slopes, and in special weather.
General safety precautions and notes for installing and using accessories.
Guides on combining working devices and selecting track shoes for operations.
Details on the purpose and precautions for using hydraulic hammers and other options.
Covers procedures for loading, unloading, fixing, and hoisting the machine.
Provides precautions for storing the excavator before, during, and after storage.
General| Maximum Digging Force (Bucket) | 138 kN |
|---|---|
| Gradeability | 35° |
| Operating Weight | 20500 kg |
| Bucket Capacity | 0.8 - 1.0 m³ |
| Max Digging Depth | 6, 620 mm |
| Max Dumping Height | 6, 700 mm |
| Travel Speed | 5.5 km/h |
To Next Page
