ZE205E/ZE230E OPERATION MANUAL
Basic operation techniques of
the excavator
Figure 3-99 Fuse capacity, circuit names and the relay names
3.5.3 Fuse
Fuse is the part with large current in the circuit and it protects the electrical components and wires from
getting burnt.
If the machine is not energized when turning the starter switch to the ON position, the fuse may have
melted. Under such condition, check the fuse and replace it if necessary.
3.6 Controller
The controller of this machine is installed in the control box located at the left side of the machine.
1. Do not spray water or mud on the controller, otherwise, failure will be caused.
2. If the controller is abnormal, please do not disassemble it by yourself and contact Zoomlion or
Zoomlion dealers for repairing.
Fuel cut-off
and quick
actuation
Fuel cut-off
and maintain.
Breaking
& traveling
boosting
https://tractormanualz.com/