FEATURES
Local and Z-Wave wireless control of your favorite home appliances like microwaves and refrigerators
Energy monitoring in live mode or over time (your Z-Wave gateway needs to support this feature)
Scene inclusion for custom automation events when included to a Z-Wave gateway controller
On/Off status recovery after power failure
LED indicator to display Z-Wave signal strength and power usage for the connected device
Added security with AES signal encryption (requires a security enabled gateway controller for full functionality)
Z-Wave Plus with improved 500 chip for faster and more reliable wireless communication
Built-in range extender
SPECIFICATIONS
Model Number: ZEN15
Z-Wave Signal Frequency: 908.42 MHz
Power: 120V, 60Hz
Maximum Load: 15A, 1800W, ½ HP
Operating Temperature: 14° – 104° F
Range: Up to 130 feet line of sight
Installation and Use: Indoor only
Dimensions: 20” (with cord) x 2.6” x 1.1”
Weight: 10oz
Z-WAVE COMMAND CLASSES
This device requires the following command classes to be supported and recognized by your Z-Wave controller:
COMMAND_CLASS_ALLSWITCH
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GROUP_INFORMATION
COMMAND_CLASS_BASIC
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCAL
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_METER
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SCENE_ACTIVATION
COMMAND_CLASS_SCENE_ACTUATOR_CONFIGURATION
To Next Page
Loading...
