EasyManua.ls Logo

ZooZ Z-Wave ZEN15 - BEFORE YOU RETURN IT; INSTALLATION: PLEASE READ; WIRELESS CONTROL

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SWITCH_BINARY
COMMAND_CLASS_VERSION
COMMAND_CLASS_ZWAVEPLUS_INFO
BEFORE YOU RETURN IT
Let us know if you are having any issues installing or operating the device.
Our fast and friendly tech support is here to help, every day of the year: ask@getzooz.com
Get more helpful tips at getzooz.com
INSTALLATION: PLEASE READ
WAIT!
Make sure the load you are about to connect does not exceed 1800W, 15A, or 1/2 HP in power.
DO NOT CONNECT THIS SWITCH TO 220V APPLIANCES.
Connecting heavy duty equipment powered by 220V to this Power Switch will DAMAGE the device and may cause
the connected appliance to malfunction.
DO NOT connect any of the following to this Power Switch:
220V water boilers
Electrical dryers
220V compressors or pumps
Phone or battery chargers
Electric heaters
You may safely use this smart plug with:
110V refrigerators rated at or below 15A
110V window and split AC units rated at or below 15A
110V Humidifiers and dehumidifiers
110V Sump pumps and other pumps rated at or below 1/2HP
Microwaves
Gas dryers
Floor lamps
TV’s and Audio / Video Equipment
Computers / PCs / Laptops
Alarm Clocks
Not sure if your equipment can be safely controlled by the Power Switch?
Just ask: ask@getzooz.com
Plug the Power Switch into any standard grounded 110V receptacle. Do NOT connect any devices to the plug at this
point. Press and release the Z-Wave button and make sure the LED indicator goes on as well – this confirms the
surge protector is active.
Q: I pressed the Z-Wave button but the LED did not light up. What should I do?
A: If you just purchased your device and the LED indicator never turned on, please try plugging the device into a
different receptacle to verify it’s not a grounding issue and try pressing the Z-Wave button a few times quickly. If the
LED still does not turn on, contact the reseller or Zooz directly: ask@getzooz.com
Use the Z-Wave button to turn the lamp or appliance on and off manually. The plug is off when the LED indicator is lit
up in pink.
WIRELESS CONTROL

Related product manuals